Explore our Comprehensive Chart of Customized Solutions for Diverse Security Needs.

PROBLEM	SOLUTION	Cypress Integration Online Product Chart
Handheld Wireless Reader Kits 2.4 GHz IEEE 802.15.4 wireless protocol Typical wireless range: 150 . indoors; 500 . outdoors / 45 m indoors; 152 m outdoors
Limited access control at construction, industrial, or temporary sites Using access control system for mustering Verifying staff credentials aboard shuttles Tracking staff training / campus event attendance In-vehicle credential verification at gates Creating temporary lanes for turnstile/ access point overflow during shift change or at other high-traffic times	HHR-4000 Series Secures wireless connection between reader and base unit (OSDP Secure Channel communication with AES-128 encryption) Credentials: HID iCLASS SE® embedded reader module High / Low Frequency (13.56 MHz/125 kHz) HID Prox, AWID Prox; ISO14443A/B ISO15693; MIFARE Classic®, MIFARE DESFire® 0.6, MIFARE DESFire® EV1 (32 bit CSN), HID: iCLASS® Standard/ SE/SR/Seos; PIV II, Secure Identity Object® (SIO®) \| CE Certified	Dual-Lane Reader Kits with Gate-Selection Feature	Single-Lane Reader Kits (No Gate Selection)
		Includes Reader(s), Charging Dock + Wall-Plug Charger (per Reader), Protective Boot (per Reader), 1 Base Unit
		1-Reader Kit HHR-4156B-GY	1-Reader Kit HHR-4166B-GY
		2-Reader Kit HHR-4256B-GY	2-Reader Kit HHR-4266B-GY
Suprex® Supervised Wiegand Reader-Extenders (include Central and Remote units)
Cannot connect RFID reader with cable due to damaged conduit, or obstacles such as parking lots, roads and railroad tracks	Wireless Suprex 2.4 GHz Wireless IEEE 802.15.4wireless protocol	SPX-5631 (5,000 ft. /1524 m typical outdoor line-of-sight range, depending on environment) CE Certified	SPX-5641 (10,000 ft. /3048 m typical outdoor line-of-sight range, depending on environment)
Reader more than 500 ft. from panel/ limited conductors available / electrical noise causing Wiegand signal interference	RS-485 Suprex (2-wire)	SPX-1300 (single reader; 10,000 ft. /3048 m typical range) CE Certified	SPX-7500 (supports Expansion Pairs; 4,000 ft. /1219 m typical range)
No available cable to install credential readers, but TCP/IP network is available	Ethernet Suprex for IP networks	SPX-7200 (typical range 328 ft. / 99 m with direct connection to network switch; can communicate across entire IP network)
Reader is long distance from controller / Fiber available / Lightning-prone sites	Fiber Optic Suprex	SPX-7400 (multi-mode;2 mile / 3.21 km typical range)	SPX-7410 (single-mode;24 mile / 38.62 km typical range)
Connecting multiple readers in close proximity using a Suprex Reader-Extender	Expansion Module Pair Supports all SPX models except SPX-1300	EXP-2000 CE Certified (Up to 7 EXP-2000 Expansion Pairs may be used with each Suprex, allowing a total of 8 readers & door I/O per Suprex)
Data Converters
Reader/controller data incompatibilities Using RS-232 serial devices with access system	Multi-Format Converter	CVX-1300 supports RS-232 to Wiegand conversions, Wiegand to Wiegand, Wiegand to RS-232 and more; see manual for details \| CE Certified
Unique data incompatibility challenges	Custom Converter	CVX-14XX for unique conversions not supported in CVX-1300 \| Custom product; contact Cypress for details \| CE Certified
Wiegand Splitters & Routers
Too few Wiegand ports to connect readers 2 Wiegand controllers to monitor 1 reader Voltage/ground potential incompatibilities between reader and panel	Passive Splitter	OPTW-100 Note: This is the upgraded model; supports 5-16 Vdc power input
	Intelligent Splitter / Router	CVX-OPTS Custom product; contact Cypress for details \| CE Certified
Barcode Scanner Kits
Visitor management system does not connect to existing Wiegand access control system Need to connect turnstile barcodes to access control system	Optical 2D Barcode Kit	TSP-2104 Honeywell 3320G 2D optical scanner
	Optical 2D Barcode Kit	TSP-2105 with Code CR1100 2D optical scanner
	Laser 1D Barcode Kit	TSP-3100 with Microscan MS-3 1D laser scanner
OSDP Devices & Tools Using SIA’S Open Supervised Device Protocol
Budget limitations prevent using OSDP Lack of available OSDP readers	OSDP-Wiegand Converter (for panel or reader)	OSM-2400 (4,000 ft. / 1219m typical RS-485 range)Note: Upgraded replacement for OSM-1000
Budget limitations prevent using OSDP Upgrading Wiegand controller for OSDP	OSDP-Wiegand In-Panel Converter	OSM-CPI for connecting OSDP readers to Wiegand control panels
Matching OSDP reader device address / baud rate with installation requirements Preconfiguring OSDP readers	Handheld OSDP COMSET Tool	OTT-2100 Configure OSDP reader device address & baud rate \| Diagnose state of OSDP communication session between reader and controller
No simple way to connect OSDP devices for testing / development	OSDP Hub Test Tool	OSM-HUB OSDP Cross-point switch; provides power and data connections for bench testing / development of OSDP devices
Troubleshooting credential data in the field Enrollment reader solutions Need credential database in site takeover	USB Data Wedge for Wiegand & OSDP readers \| Configurable	WDG-6112 Connect reader to computer via USB-C connection and output credential data; for diagnostic / enrollment reader applications.