Edge Device
SIO-7300
TCP/IP Edge Device
With the SIO-7300 Edge Device, you can connect a single Wiegand reader to network software, without a traditional access control system. You can also use network software to output credential data to an access controller.This access control accessory supports Wiegand I/O, digital I/O, analog inputs and relay outputs, and is controlled by a network controller using the SIO protocol.
Note: This product is intended for use by customers writing their own software to control the device, using the Cypress SIO protocol.
UPC: 816684003080
Applications
-
- Install RFID readers at nontraditional access points such as gas pumps or industrial machinery
- Connect software/network device to physical access control system
- Connect a Wiegand reader to a network
Communications
-
- RJ45 Ethernet 10Base-T or 100Base-TX (auto-sensing)
- Ethernet: Version 2.0/IEEE 802.3 (electrical), Ethernet II frame type
- Network protocol: TCP/IP
- Create your own software/network implement of the Cypress SIO protocol
Reader Interface and I/O
-
- Wiegand (248 bits)
- Wiegand input mode: Connects to Wiegand reader
- Wiegand output mode: Connects to access control panel
- (2) SPDT relay outputs, dry/wet contact (see manual for details)
- (2) Analog input pins
- (1) LED digital I/O pin (input or output based on reader interface mode)
- (2) Digital I/O pins (configurable as input or output, using DIP switches)
- (1) Digital input pin
Mechanical
-
- Durable aluminum housing;
- Removable screw-terminal connectors
- Input power: 8 – 16 Vdc (12 V typical)
Dimensions
