• SPX-5631 Product

SPX-5631

Wireless Suprex® Wiegand and OSDP Extender

with 1-mile range

 

If you need to install readers without dragging cable, if you are dealing with damaged conduit, or if the reader needs to connect over city streets, parking lots, or railroad tracks, use the SPX-5631 Wireless Wiegand Extender. The RF Suprex supports OSDP readers connected to the OSDP controllers, Wiegand readers connected to Wiegand controllers, or a combined OSDP/Wiegand system.

 

Range: 1 mile / 1.6 km outdoors with line of sight, depending on environment 

For longer range, see the SPX-5641 Long-Range Wireless Extender and the RPT-5651 Wireless Repeater

 

How it works:

      • 2 units connect to the reader/door hardware and panel, with a wireless connection in between 
      • Supports reader LED and auxiliary I/O signals, with dry contact relay outputs for activating doors and gates
      • 2.4 GHz wireless connection uses IEEE 802.15.4 wireless protocol
      • 1 relay can supervise the reader-panel connection

 

Note: OSDP capabilities have recently been added to the RF Suprex Reader Extenders (firmware v5.0.0). If a firmware upgrade is required please contact Cypress Tech Support.

 

UPC: 816684001765

 
ManualQuick StartSales Sheet
 
 

Applications

    • Install OSDP or Wiegand readers at remote entrances/gates
    • Sites where readers are more than 500 ft. from panel
    • Sites with damaged conduit
    • Connecting readers across city streets, parking lots, railroads, and more
    • Jobs where trenching and pulling cable is difficult, cost-prohibitive or restricted
    • Reader installations in temporary locations
    • Installing readers in elevator cabs

 

Features

Overview
    • Includes 2 units in outdoor enclosures
    • Central and Remote units are preconfigured and ready to use
    • Units can be paired in field if needed
    • Minimal power requirement†
    • In Wiegand mode, connect up to 7 additional readers over the same wireless connection using EXP-2000 Expansion pairs (1 pair per additional Wiegand reader. NOTE: EXP-2000s are not supported in OSDP mode)
    • Lifetime warranty (registration required)
    • Readily available through major distributors

 

† Central Unit can often be powered by panel’s reader port, and Remote Unit can often share power with reader

 

 
Communications
    • Wireless 2.4GH using IEEE 802.15.4 protocol
    • F-style chip antenna (omnidirectional; units do not have to directly face each other)
    • 1-mile / 1.6 km outdoor range*
    • Supervised communication mode available

 

* with line of sight, depending on environment

 

 
Reader Interface
    • Supports 4-248 bits of credential data
    • Supports OSDP, Wiegand, Wiegand keypad, Strobed/Magstripe, and unsupervised F/2F interfaces
    • Supports reader LED and auxiliary digital I/O
    • 2 dry contact relay outputs on Central Unit
    • 2 dry contact relay outputs on Remote Unit

 

 
Environmental
    • 2 units, each in weather-resistant ABS IP65 enclosures
    • Dimensions: 9.25 x 7.0 x 2.25 in. / 23.49 x 17.78 x 5.71 cm
    • Central/Remote unit weight: 1.3 lbs. / 0.58 kg.
    • Storage temperature:-40ºF to 212ºF / -40ºC to 100ºC
    • Operating temperature:-22ºF to 140ºF /-30ºC to 60ºC

 
 
Slide background

Please use email if at all possible and include a phone number if a return call is preferred.

Please be safe and remain aware of the risks.

If your inquiry is not urgent please leave a message and it will be handled as quickly as possible.

Please share this will any and all that you deem may need to know.

Presales, service and support will be available M-F from 9am - 6pm EST.

Emails to solutions@cyprx.com will be addressed in a timely manner and calls to +1.810.245.2300 will be returned if you leave a detailed email with your name and return phone number.

To valued partners,

As Covid-19 continues to create challenges for personal health and business continuity we have decided to take a brief pause from our manufacturing operations until next Wednesday April 8, 2020.